Ceramic anilox roller maintenance tips

 

The ceramic anilox roller is a very precise part in the printing industry, and its function can be imagined. Therefore, the maintenance of the ceramic anilox roller is also very important. The following editor will share four maintenance tips for your reference.

1. Use the anilox roller protective cover when storing the anilox roller

The use of the anilox roller protective cover, on the one hand, has a better cushioning and vibration absorption effect, and on the other hand, it can keep the surface of the anilox roller clean. 

2. Detect ink viscosity and clean the anilox roller in time

The cause of the clogging of the anilox roller is, on the one hand, the nature of the ink itself, such as too fast drying; on the other hand, it is the cause of cleaning, such as incomplete cleaning or untimely cleaning. Therefore, it is important to keep the ink viscosity constant during the printing process. When cleaning the anilox roller, it is important to use cleaning methods with less damage to the anilox roller and timely cleaning.

3. Use high-quality doctor blade and magnetic filter

Use a high-quality doctor blade and control the pressure between the doctor blade and the anilox roller. If conditions permit, put a magnetic filter in the ink tank to reduce the impurity particles in the ink, reduce the abrasion of the anilox roller, and extend its Service life. 

4. Use a mesh microscope to check the cells regularly

 

 

Use a mesh microscope to check the cells regularly. If scratches or blockages are found on the anilox roller, take immediate measures to deal with them.